Founder of Citrus-Based Cleaning Technology

Mineral & Rust Remover

Mineral & Rust Remover

play video

alt text

alt text

ORANGE-SOL MINERAL & RUST REMOVER
42530 • 32 oz: 12 x 32 oz • 115 Cs/pallet • Cs: 25 lbs
42532 • 1 Gal: 4 x 1 Gal • 60 Cs/pallet • Cs: 30 lbs
42533 • 5 Gal: 1 x 5 Gal • 48/pallet • Ea: 40 lbs
42534 • 55 Gal: 1 x 55 Gal • 4/pallet • Ea wt: 497 lbs
42535 • 330 Gal Tote: 1 x 330 Gal • Ea: 2700 lbs

Product Description +

ORANGE-SOL Mineral & Rust Remover is a superior performing, surface-friendly, VOC compliant, industrial strength cleaning agent for use where an aqueous or rinseable product with high solvency is desired. Reliable supply, product quality and economy.

Features / Benefits +

· Safer alternative to acid cleaners and other hazardous chemicals · Non-flammable · Contains no VOC’s
· Exceptional safety; classified as a mild skin irritant · Replaces multiple acid blends · Non-fuming
· Phosphate-free · Perfect fit for in situ cleaning of high capacity tanks where limited dilutions indicated
· Significant performance benefits versus phosphoric, citric, hydroxyacetic, sulfamic, oxalic & other acids
· 70% more effective than citric, glycolic acid and 50% more effective on phosphoric acid on calcium carbonate
· DOT class: Non-regulated

Applications +

Excellent for in situ cleaning and industry applications including heat exchangers, large equipment, mineral and rust removal, and related descaling challenges.
Powerful, water rinsable solvent and penetrant for tough-to-remove soils including, but not limited to:
· Calcium carbonate · Magnesium · Mineral buildup
· Fluoride deposits · General soils · Most salts including sulfate salts
· Hard water film · Rust · Silica

How to Use +

ORANGE-SOL Mineral & Rust Remover as a multi-purpose remover can be used full-strength or diluted up to 1:1 depending on specific cleaning requirements. It can be used full-strength in pressure sprayers, soak tanks or by pouring or wiping on. Easily rinsed with no residue.
General use: Apply to problem area. Allow sufficient time for product to penetrate (varies by application and severity of buildup). Rinse with clean, potable water for residue-free surfaces. Can be poured or wiped on.
When used in-situ in lines and equipment: Ensure plumbing and containers have been passivated, then introduce Mineral & Rust Remover into system. Allow for sufficient time to accomplish task (Can vary one to four hours). Remove, flush with potable water and resume production.

Surface Compatibility +

Safe for use on most water tolerant surfaces, but not limited to:
· Brass · Copper · Aluminum (most grades) · Stainless steel
· Glass · Most plastics · Most metals (see following extended use cautions)
· Corrosion inhibitors added. Some metals may experience minimal etch with extended exposure.

Physical Properties +

Flash Point: Not applicable.
Appearance: Translucent, dark brown liquid liquid.
Odor: Acidic odor.
Specific Gravity: 1.1, 9.16 lbs/US gallon
Boiling Point/Boiling Range: 212° F (100° C)
Vapor Pressure: Not determined.
Auto Igniting: NProduct is not selfigniting
pH Value at 20° C (68° F): <1.
Solubility in Water: Fully miscible.
Flammability (solid/gaseous): Non-flammable.

Product safety information required for this product is not included herein. Before handling, read safety data sheet (SDS) and container label for safe use, physical and health hazard information.

SDS Request +

The safety data sheet (SDS) is available by emailing ORANGE-SOL direct.