Founder of Citrus-Based Cleaning Technology

Heavy-Duty 143V

Heavy-Duty 143V

alt text
alt text

ORANGE-SOL HEAVY-DUTY 143V
40295V • 32 oz: 12 x 32 oz • 115 Cs/pallet • Cs: 25 lbs
40297V • 1 Gal: 4 x 1 Gal • 60 Cs/pallet • Cs: 30 lbs
40298V • 5 Gal: 1 x 5 Gal • 48/pallet • Ea: 40 lbs
40299V • 55 Gal: 1 x 55 Gal • 4/pallet • Ea wt: 497 lbs
20005V • 330 Gal Tote: 1 x 330 Gal • Ea: 2700 lbs

Product Description +

ORANGE-SOL Heavy-Duty 143V is a superior performing, surface-friendly, non-toxic industrialal strength remover for use where high solvency is desired. Reliable supply, product quality and economy. Special VOC formula of our popular Heavy-Duty 143.

Features / Benefits +

· Contains no water, only 100% active ingredients
· Surface-friendly · Non-flammable · Non-corrosive
· Biodegradable · Non-toxic · 100% organic · No harmful vapors
· Safe on colorfast clothing and fabric
· Safe on clearcoats and dry paint · Excellent in parts washers
· Product is non-toxic and user safe. Reduces costs for protective clothing, hazardous material handling, medical surveillance while surpassing high environmental regulatory standards.

Applications +

Powerful, water rinsable solvent and penetrant for tough-to-remove soils including, but not limited to:
· Adhesives · Asphalt · Carbon black · Caulk
· Cosmoline · Creosote · Diesel / Soot · Floor adhesive
· Glues (fresh) · Grease · Lubricants · Mastic / Cutback
· Oil · Oil-based paint, stain & lacquer (wet) · Resins / Rosins

· Sap · Silicone · Tar · Waxes

How to Use +

ORANGE-SOL Heavy-Duty 143V should be used full strength and is non-dilutable. It can be sprayed or wiped on.
GENERAL USE (HARD SURFACES): Can be used in any industrial cleaning system including ultra-sonic cleaners, dip tanks, parts washers and hand wiping. No special equipment or protective clothing is required for handling or disposal.
ADHESIVE & SEALANT RESIDUE: When wiping or spraying on, allow to penetrate. For tape, peel back carrier after soaking for a few minutes. Wipe with clean cloth.
PARTS WASHERS, SONIC CLEANERS, DIP TANKS: Soak or flush parts to be cleaned as required to loosen grease and grime. Remove and allow to dry. Drying time can be accelerated by wiping or blowing dry.
SHOP/PRODUCTION FLOORS: Apply to the floor and allow to work for one minute. Residue can be collected with a wet/dry vacuum, washed into a sump drain, or picked up with an absorbent.
ASPHALT & TAR REMOVAL: Apply onto the affected area. In order to loosen the top skin or tar or asphalt, gently work in with a clean cloth for spot removal, or a brush, for heavily contaminated areas.
RECOVERY: Reusable whenever recovery is possible. When collected, contaminants will settle out, allowing this product to be poured or pumped off the top.

Surface Compatibility +

Heavy-Duty 143V Citrus Solvent is surface friendly and substrate compatible for most surfaces including clearcoats, clothes, dry paint, vinyl and more. May not be compatible full strength for extended periods of time on EPDM, butyl, some styrene products. A small test patch in an inconspicuous area is recommended if unsure of compatibility. Do not let sit for extended periods of time on silicone, caulk or rubber items.
Safe for use on all water tolerant surfaces, but not limited to:
· Autos/Machinery · Cured paint · Metals · Ceramics · Concrete
· Brick · Glass · Most plastics · Stone (sealed) · Acrylic
· Fiber-clad and metal laminates · Porcelain · Vinyl
· Fabric (colorfast) · Stainless Steel · Wood

Physical Properties +

Flash Point: 143° F (61.6° C) PMCC, ASTM D-93
Appearance: Clear orange liquid.
Odor: Citrus.
Weight per Gallon: 6.8135 lbs/gal
Specific Gravity: .808
Vapor Density at 68° F (20° C): (Air=1) 4.5.
Vapor Pressure at 68° F (20° C): .59mm Hg
Evaporation Rate: (BuAc=1) 0.06.
pH Value: None
Solubility in Water: Not soluble in water.
Flammability: Non-flammable.

Product safety information required for this product is not included herein. Before handling, read safety data sheet (SDS) and container label for safe use, physical and health hazard information.

SDS Request +

The safety data sheet (SDS) is available by emailing ORANGE-SOL direct.